HTC REGULATOR INTEGRTAED CIRCUITS

LM2950-5.0 and LM2950-3.3V VOLTAGE REGULATOR

Rs 4.10 / PieceGet Best Price

Minimum Order Quantity: 1000 Piece

Brand	HTC
Output Voltage	5V
Phase	LDO
Model Name/Number	LM2950G-5.0 / LM2950G-3.3
Regulator Type	LDO
Usage/Application	Electronics
Mounting Type	TO-92
Part Number	LM2950G-5.0 / LM2950G-3.3
Output Type	Fixed
Type	Non-Leaded

100mA LOW DROPOUT VOLTAGE REGULATOR

	FEATURES
	- High accuracy output voltage - Guaranteed 100 mA output - Very low quiescent current - Low dropout voltage - Extremely tight load and line regulation - Very low temperature coefficient - Needs Output low-ESR ceramic capacitor for stability - Logic-controlled electronic shutdown

DESCRIPTION

The LM2950G is a low power voltage regulator. This device is an excellent choice for use in battery-powered application such as cordless telephones, radio-control systems, and portable computers.
The LM2950G features a very low quiescent current (75uA typ.) and a very low drop output voltage (typ. 40mV at a light load and 380mV at 100mA).
Furthermore, a tight initial Output voltage tolerance of 0.5% Typ., an extremely good load and line regulation of 0.05% Typ., and a very low output temperature coefficient ? all that makes the LM2950G very useful as a low-power voltage reference

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 1000 PCS PACKING

View Complete details

get quote request a call back

Voltage Regulator IC LM2576-HVR-12

Rs 60 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Model Number/Name	LM2576-HVR-12
Regulator Type	Switching Regulator
Brand	HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM2576-HVR-12

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Additional Information:

Delivery Time: READY STOCK
Packaging Details: 800 PCS REEL

View Complete details

get quote request a call back

LM2576-HVR-5 Voltage Regulator

Rs 60 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Regulator Type	Switching Regulator
Brand	HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM2576-HVR-5

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V 4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed 4% tolerance on output voltage within specified input voltages and output load conditions, and 10% on the oscillator frequency (2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Additional Information:

Delivery Time: READY STOCK
Packaging Details: 800 PCS REEL

View Complete details

get quote request a call back

LM1117GS-ADJ Voltage Regulator IC

Rs 4.75 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Regulator Type	LDO
Brand	HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM1117GS-5

1.0A LDO VOLTAGE REGULATOR (Adjustable & Fixed)

	FEATURES
	- Output Current up to 1A - MLCC, Aluminum electrolytic capacitor applicable - Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V - Line Regulation typically at 0.1% max. - Load Regulation typically at 0.2% max. - Internal Current and Terminal Protection - Surface Mount Package SOT-223 - Moisture Sensitivity Level 3

DESCRIPTION

T The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers. The LM1117 features very low quiescent current and very low dropout voltage of 1V at a full load and lower as output current decreases. LM1117 is available as an adjustable or fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5.0V output voltages. The LM1117 is offered in a 3-pin surface mount package SOT-223. The output capacitor of 10µF or larger is needed for output stability of LM1117 as required by most of the other regulator circuits.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 2500 PCS REEL

View Complete details

get quote request a call back

TJ7660N / TJ7660D HTC Integrated Circuits

Rs 17.5 / PieceGet Best Price

Minimum Order Quantity: 1000 Piece

Brand	HTC
Usage/Application	Electronics
Mounting Type	DIP SMD BOTH
Part Number	TJ7660D / TJ7660N
Functionality	The HTC TJ7660 is a monolithic CMOS power supply circuit
Type	Non-Leaded
Package	DIP SMD BOTH
I Deal In	New Only

CHARGE PUMP VOLTAGE CONVERTER

FEATURES

- Simple Conversion of +5V Logic Supply to 5V Supplies
- Simple Voltage Multiplication (VOUT = (-) nVIN)
- Typical Open Circuit Voltage Conversion Efficiency 99.9%
- Typical Power Efficiency 98%
- Wide Operating Voltage Range- TJ7660 1.5V to 10.0V
- Easy to Use - Requires Only 2 External Non-Critical Passive Components
- No External Diode Over Full Temp. and Voltage Range
- Moisture Sensitivity Level 3

DESCRIPTION

The HTC TJ7660 is a monolithic CMOS power supply circuit which offers unique performance advantages over previously available devices.
The TJ7660 performs supply voltage conversions from positive to negative for an input range of +1.5V to +10.0V resulting in complementary output voltages of -1.5V to -10.0V. Only 2 noncritical external capacitors are needed for the charge pump and charge reservoir functions.
The TJ7660 can also be connected to function as voltage doublers and will generate output voltages up to +18.6V with a +10V input. Contained on the chip are a series DC supply regulator, RC oscillator, voltage level translator, and four output power MOS switches.
A unique logic element senses the most negative voltage in the device and ensures that the output N-Channel switch source-substrate junctions are not forward biased. This assures latchup free operation.
The oscillator, when unloaded, oscillates at a nominal frequency of 10kHz for an input supply voltage of 5.0V.
This frequency can be lowered by the addition of an external capacitor to the OSC terminal, or the oscillator may be overdriven by an external clock.
The LV terminal may be tied to GROUND to bypass the internal series regulator and improve low voltage (LV) operation. At medium to high voltages (+3.5V to +10.0V for the TJ7660), the LV pin is left floating to prevent device latchup.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 1000 PCS PACK IN DIP AND 2500 PCS REEL SMD

View Complete details

get quote request a call back

Lm39302r Voltage Regulator

Rs 46 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Usage/Application	Electronics
Mounting Type	SMD
Regulator Type	Switching Regulator
Part Number	LM39302R
Brand	HTC
Type	Non-Leaded
Output Type	Variable
Output Current	3A minimum guaranteed output current

3.0A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR

FEATURES

- 3A minimum guaranteed output current
- 500mV typical dropout at 3A
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V or 1.5V conversion
- 1% initial accuracy
- Low ground current
- Current limiting and thermal shutdown
- Reversed-battery protection
- Reversed-leakage protection
- Fast transient response
- TTL/CMOS compatible enable pin - LM39301
- Error flag output - LM39301 only
- Adjustable version - LM39302 only
- TO-263 and TO-220 packaging
- Moisture Sensitivity Level 3

DESCRIPTION

The LM39300, LM39301 and LM39302 are 3.0A low-dropout linear voltage regulators that provide a low voltage, high-current output with a minimum of external components. The LM39300/1 offers extremely low dropout (typically 400mV at 3.0A) and low ground current (typically 36mA at 3.0A).
The LM39300/1/2 is ideal for PC add-in cards that need to convert from standard 5V or 3.3V down to new, lower core voltages. A guaranteed maximum dropout voltage of 500mV over all operating conditions allows the LM39300/1/2 to pro-vide 2.5V from a supply as low as 3V.
The LM39300/1/2 also has fast transient response for heavy switching applications.The device requires only 47µF of output capacitance to maintain stability and achieve fast transient responseThe LM39300/1 is fully protected with over current limiting,thermal shutdown, reversed-battery protection, reversed-leakage protection, and reversed-lead insertion. The LM39301 offers a TTL-logic compatible enable pin and an error flag that indicates under voltage and over current conditions. Offered in fixed voltages, the LM39300/1/2 comesin the TO-220 and TO-263 packages and is an ideal upgrade to older, NPN-based linear voltage regulators.

Additional Information:

Item Code: LM39302R
Delivery Time: READY STOCK
Packaging Details: 800 PCS REEL

View Complete details

get quote request a call back

LM2576 HVR-5.0V Integrated Circuits

Rs 60 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Brand	NSC / HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM2576-HVS-5
Type	Leaded, Non-Leaded
Package	TO-263

LM2576HV

Home > Products > Step-Down Switching Voltage Regulator > LM2576HV

60V, 3.0A, 52kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- Adjustable Version Output Voltage Range, 1.23V to 52V ±4%
- Max over Line and Load conditions
- Guaranteed Output Current of 3A
- Fixed Output Voltages : 3.3V, 5.0V, 12V and 15V
- Wide Input Voltage Range 60V
- 52 kHz Fixed Frequency Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- Requires only 4 External Components
- High Efficiency
- Use Readily Available Standard Inductors
- Available in TO-220, TO-263 and SOP-8PP Packages
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Packages

DESCRIPTION

The LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.
Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2576HV series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required. A standard series of inductors optimized for use with the LM2576HV are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: IN REEL PACKING

View Complete details

get quote request a call back

LM1117MPX-3.3V SOT223 Integrated Circuits

Rs 7 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Brand	NSC / ST / HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM1117MPX-3.3V
Type	Non-Leaded
Package	SOT-223
Voltage	3.3V
I Deal In	New Only

We are one of the leading providers of LM1117MPX-3.3V SOT223 integrated circuits. We believe in delivering quality products only

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 2500 PCS REEL

View Complete details

get quote request a call back

LM2596T-12 Voltage Regulator

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Model Name/Number	LM2596T-12
Regulator Type	Switching Regulator
Brand	HTC
Usage/Application	Electronics
Mounting Type	DIP
Output Type	Variable

40V, 3.0A, 150kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.2 to 37V
- ±4%. Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 150kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3

DESCRIPTION

The LM2596 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2596 are offered by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2596 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±15% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. Self protection features include a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete protection under fault conditions.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 1000 PCS STOCK

View Complete details

get quote request a call back

LM2576R-12 Integrated Circuits

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 800 Piece

Product Type	LM2576R-12
Packaging Type	REEL
Output Voltage	As per data sheet
Regulator Type	Switching Regulator
Brand	HTC
Make	HTC KOREA
Pack Contains	800 PCS
Part Number	LM2576R-12

LM2576R-12 TO-263-5L Step-Down Switching Regulator.................................

Additional Information:

Delivery Time: READY STOCK

View Complete details

get quote request a call back

LM2576R-ADJ Voltage Regulator IC

Rs 29 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Output Voltage	Adjustable Version Output Voltage Range, 1.23 to 37V +/- 4% maximum over line and load conditions
Model Name/Number	LM2576R-ADJ
Regulator Type	Switching Regulator
Brand	HTC
Usage/Application	ELECTRONICS MEDICAL POWER AND ALL
Mounting Type	SMD
Part Number	LM2576R-ADJ
Package	TO-263
Voltage	Adjustable Version Output Voltage Range, 1.23 to 37V +/- 4% maximum over line and load conditions
Number Of Pins	5

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Additional Information:

Delivery Time: READY STOCK
Packaging Details: 800 PCS REEL

View Complete details

get quote request a call back

LM1117GS-3.3V Voltage Regulator IC

Rs 5 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Output Voltage	3.3
Model Name/Number	LM1117GS-3.3V
Regulator Type	LDO
Brand	HTC
Usage/Application	ALL
Part Number	LM1117GS-3.3V
Functionality	LDO
Output Type	Fixed
Type	Non-Leaded
Package	SOT223
Voltage	3.3V
Number Of Pins	3
Part No.	LM1117GS-3.3V
Output	3.3
I Deal In	New Only
Mounting Type	SMD SOT223
Pack Contains	2500 PCS

LM1117GS-3.3V HTC MAKE

Additional Information:

Delivery Time: READY STOCK
Packaging Details: 2500 PCS REEL

View Complete details

get quote request a call back

Ld1117v33 Adjustable And Fixed Low Drop Positive Voltage Regulator

Rs 25 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Regulator Type	Linear Regulator
Brand	ST
Usage/Application	Electronics
Mounting Type	DIP
Part Number	LD1117V3.3V
Output Type	Fixed
Output Current	Output current up to 800 mA

The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version (VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V and 5.0 V. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT-223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10 µF minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1 % at 25 °C. The adjustable LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of drop and tolerance.

Features • Low dropout voltage (1 V typ.) • 2.85 V device performances are suitable for SCSI-2 active termination • Output current up to 800 mA • Fixed output voltage of: 1.2 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V • Adjustable version availability (VREF = 1.25 V) • Internal current and thermal limit • Available in ± 1 % (at 25 °C) and 2 % in full temperature range • Supply voltage rejection: 75 dB (typ.)

Additional Information:

Item Code: LD1117V33
Delivery Time: EX STOCK
Packaging Details: TUBE PACKING

View Complete details

get quote request a call back

LM1117MPX-5V SOT223 Integrated Circuits

Rs 7 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Brand	NSC / HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM1117MPX-5
Type	Non-Leaded
I Deal In	New Only

LM1117MPX-5V SOT223..................................................................

Additional Information:

Delivery Time: EX STOCK
Packaging Details: IN 2500 PCS REEL

View Complete details

get quote request a call back

LM2576T-12 Switching Regulator

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Brand	HTC
Regulator Type	Switching Regulator
Output Type	Variable
Design	Standard

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

View Complete details

get quote request a call back

LM1117S-5V Voltage Regulator IC

Rs 4.25 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Model Name/Number	LM1117GS-5
Regulator Type	LDO
Brand	HTC

1.0A LDO VOLTAGE REGULATOR (Adjustable & Fixed)

	FEATURES
	- Output Current up to 1A - MLCC, Aluminum electrolytic capacitor applicable - Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V - Line Regulation typically at 0.1% max. - Load Regulation typically at 0.2% max. - Internal Current and Terminal Protection - Surface Mount Package SOT-223 - Moisture Sensitivity Level 3

DESCRIPTION

T The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers. The LM1117 features very low quiescent current and very low dropout voltage of 1V at a full load and lower as output current decreases. LM1117 is available as an adjustable or fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5.0V output voltages. The LM1117 is offered in a 3-pin surface mount package SOT-223. The output capacitor of 10µF or larger is needed for output stability of LM1117 as required by most of the other regulator circuits.

View Complete details

get quote request a call back

LM2576R-5 Integrated Circuits

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Functionality	Volatage Regulator
Output Voltage	As per Data Sheet
Brand	HTC

LM2576R-5 Voltage Regulator
FEATURES- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

View Complete details

get quote request a call back

LM2596T-ADJ Voltage Regulator

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

40V, 3.0A, 150kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.2 to 37V
- ±4%. Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 150kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3

DESCRIPTION

The LM2596 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2596 are offered by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2596 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±15% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. Self protection features include a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete protection under fault conditions.

View Complete details

get quote request a call back

LM2596R-ADJ Integrated Circuits

Rs 29.50 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Brand	HTC
Usage/Application	Electronics
Mounting Type	SMD
Part Number	LM2596R-ADJ
Functionality	REGULATOR
Type	Non-Leaded
Package	TO-263

40V, 3.0A, 150kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.2 to 37V
- ±4%. Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 150kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3

DESCRIPTION

The LM2596 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2596 are offered by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2596 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±15% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. Self protection features include a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete protection under fault conditions.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 800 PCS REEL

View Complete details

get quote request a call back

Lm2576t-5 Integrated Circuits

Rs 29.50 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Output Voltage	Switching
Regulator Type	Switching Regulator
Brand	HTC
Usage/Application	Electronics
Part Number	LM2576T-5
Output Type	Variable

40V, 3.0A, 52kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Additional Information:

Delivery Time: EX STOCK
Packaging Details: 1000 PCS BOX

View Complete details

get quote request a call back

Lm2576t-adj Integrated CircuitsLM2576T-ADJ Integrated Circuits

Rs 29.50 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Output Voltage	Switching
Output Type	Variable
Regulator Type	Switching Regulator
Brand	HTC

40V, 3.0A, 52kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

DESCRIPTION

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version.
These regulatiors were designed to minimize the number of externalcomponents to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.
Since the LM2576 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear reguators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. The output switch includes cycle-bycycle current limiting, as well as thermal shutdown for full protection under fault conditions.

View Complete details

get quote request a call back

LM2596R-ADJ Integrated Circuits

Rs 29 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Regulator Type	Switching Regulator
Brand	HTC

LM2596R-ADJ TO-263-5L Step-Down Switching Regulator

FEATURES- 3.3V, 5.0V, 12V, 15V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.23 to 37V ±4%
- Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 52kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3 for SMD Package

View Complete details

get quote request a call back

LM2596T-5 Integrated Circuits

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Number Of Pins	5
Mounting Type	DIP
Usage/Application	Electronics
Type	Leaded

40V, 3.0A, 150kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.2 to 37V
- ±4%. Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 150kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3

DESCRIPTION

The LM2596 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2596 are offered by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2596 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±15% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. Self protection features include a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete protection under fault conditions.

...............

Additional Information:

Delivery Time: ex stock

View Complete details

get quote request a call back

LM2596R-5 Integrated Circuits

Rs 29.5 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Regulator Type	Switching Regulator
Brand	HTC

40V, 3.0A, 150kHz, STEP-DOWN SWITCHING REGULATOR

FEATURES

- 3.3V, 5.0V, 12V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range, 1.2 to 37V
- ±4%. Maximum Over Line and Load Conditions
- Guaranteed 3.0A Output Current
- Wide Input Voltage Range
- Requires Only 4 External Components
- 150kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level 3

DESCRIPTION

The LM2596 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2596 are offered by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. The LM2596 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±15% on the oscillator frequency (±2% over 0°C to 125°C).
External shutdown is included, featuring 80 (typical) standby current. Self protection features include a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete protection under fault conditions.

Additional Information:

Delivery Time: IMMEDIATE

View Complete details

get quote request a call back

Component Source

LM2950-5.0 and LM2950-3.3V VOLTAGE REGULATOR

Voltage Regulator IC LM2576-HVR-12

LM2576-HVR-5 Voltage Regulator

LM1117GS-ADJ Voltage Regulator IC

TJ7660N / TJ7660D HTC Integrated Circuits

Lm39302r Voltage Regulator

LM2576 HVR-5.0V Integrated Circuits

LM1117MPX-3.3V SOT223 Integrated Circuits

LM2596T-12 Voltage Regulator

LM2576R-12 Integrated Circuits

LM2576R-ADJ Voltage Regulator IC

LM1117GS-3.3V Voltage Regulator IC

Ld1117v33 Adjustable And Fixed Low Drop Positive Voltage Regulator

LM1117MPX-5V SOT223 Integrated Circuits

LM2576T-12 Switching Regulator

LM1117S-5V Voltage Regulator IC

LM2576R-5 Integrated Circuits

LM2596T-ADJ Voltage Regulator

LM2596R-ADJ Integrated Circuits

Lm2576t-5 Integrated Circuits

Lm2576t-adj Integrated CircuitsLM2576T-ADJ Integrated Circuits

LM2596R-ADJ Integrated Circuits

LM2596T-5 Integrated Circuits

LM2596R-5 Integrated Circuits

EXPLORE MORE CATEGORIES

Integrated Circuits

Microcontroller

Texas Instruments Intereated Circuits

EPROM - IC'S

NUVOTON MICRONTROLLER

Regulator Integrated Circuits

ADC ANALOG TO DIGITAL CONVERTER IC

Character LCD Display Module