New Items

Product Details:

Product Name - XY128
Mounting Type – PCB Vertical
Number of Pin  - 2 Pin And 3 Pin
Voltage Rating - 250 Volts
Current Rating - 16 Amp
Temperature - -40c + 105c
Wire Range - 24-12awg  2. 5sqmm

Product Details:

 The MOC301XM and MOC302XM series are optically isolated triac driver devices. These devices contain a GaAs infrared emitting diode and a light activated silicon bilateral switch, which functions like a triac. They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 VAC operations.

Product Details:

FEATURES Fast Switching Speed Surface Mount Package Ideally Suited for Automatic Insertion For General Purpose Switching Applications High Conductance

Product Details:

Typical applications Blocking Coupling, decoupling Bypassing RFI for automotive Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1:2013): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology for lead spacing 5 to 15 mm(= code C, D or E in digit 7 of ordering code) Wound capacitor technology for lead spacing 10 to 37.5 mm (= code N, Q or R in digit 7 of ordering code) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features High pulse strength High contact reliability RoHS-compatible Halogen-free capacitors available on request AEC-Q200D compliant Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated DC voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing ≥10 m

Product Details:

E22-900T30S LoRa 868MHz 915MHz 30dBm SMD UART Wireless Transmitter and Receiver Long Range RF Module IoT [Chip solution]：LoRa solution [Frequency]：850.125~930.125MHz [Transmitter power]：30dBm [Communication distance]：10km [Size]：25*40.5mm [Product weight]：5.8±0.1g [Introduction]：E22-900T30S is a new generation of LoRa wireless module, based on the wireless serial port module (UART) of SEMTECH's LoRa solution, with multiple transmission modes.

Product Details:

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. WIZnet‘s Hardwired TCP/IP is the market-proven technology that supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols. W5500 embeds the 32Kbyte internal memory buffer for the Ethernet packet processing. If you use W5500, you can implement the Ethernet application just by adding the simple socket program. It’s faster and easier way rather than using any other Embedded Ethernet solution. Users can use 8 independent hardware sockets simultaneously. SPI (Serial Peripheral Interface) is provided for easy integration with the external MCU. The W5500’s SPI supports 80 MHz speed and new efficient SPI protocol for the high speed network communication. In order to reduce power consumption of the system, W5500 provides WOL (Wake on LAN) and power down mode.

Product Details:

FEATURES  Diffusedjunction  Lowreverseleakagecurrent  Lowforward voltage drop  Highcurrent capability  Glasspassivated junction m  Surface ount device MECHANICAL DATA  Case: SMA(DO-214AC)  CaseMaterial: Molded Plastic. UL flammability  Classification Rating: 94V-0  Weight: 0.065 grams (approximate)

Product Details:

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage maximum of 3mV (2mV maximum for LM358BA and LM2904BA), and lower quiescent current of 300µA per amplifier (typical). High ESD (2kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.

The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages including SOIC, TSSOP, and VSSOP.

Product Details:

The EL357N-G series contains an infrared emitting diode, optically coupled to a phototransistor detector. The devices in a 4-pin small outline SMD package.

Applications
• DC-DC Converters
• Programmable controllers
• Telecommunication equipments
• Signal transmission between circuits of different potentials and impedances

Product Details:

The AD620 is a low cost, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. Furthermore, the AD620 features 8-lead SOIC and DIP packaging that is smaller than discrete designs and offers lower power (only 1.3 mA max supply current), making it a good fit for battery-powered, portable (or remote) applications. The AD620, with its high accuracy of 40 ppm maximum nonlinearity, low offset voltage of 50 μV max, and offset drift of 0.6 μV/°C max, is ideal for use in precision data acquisition systems, such as weigh scales and transducer interfaces. Furthermore, the low noise, low input bias current, and low power of the AD620 make it well suited for medical applications, such as ECG and noninvasive blood pressure monitors. The low input bias current of 1.0 nA max is made possible with the use of Superϐeta processing in the input stage. The AD620 works well as a preamplifier due to its low input voltage noise of 9 nV/√Hz at 1 kHz, 0.28 μV p-p in the 0.1 Hz to 10 Hz band, and 0.1 pA/√Hz input current noise. Also, the AD620 is well suited for multiplexed applications with its settling time of 15 μs to 0.01%, and its cost is low enough to enable designs with one in-amp per channel. 

Product Details:

The LM4871 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply (see Note). To conserve power in portable applications, the LM4871's micropower shutdown mode (IQ = 0.6µA, typ) is activated when VDD is applied to the SHUTDOWN pin. Boomer audio power amplifiers are designed specifically to provide high power, high fidelity audio output. They require few external components and operate on low supply voltages from 2.0V to 5.5V. Since the LM4871 does not require output coupling capacitors, bootstrap capacitors, snubber networks, it is ideally suited for low-power portable or systems that require minimum volume and weight. Additional LM4871 features include thermal shutdown protection, unity-gain stability, and external gain set. Note: An LM4871LD that has been properly mounted to a circuit board will deliver 3W into 3Ω (at 10% THD). The other package options for the LM4871 will deliver 1.5W into 8Ω (at 10% THD). See the Application Information section for further information concerning the LM4871LD, LM4871MM, LM4871M, and the LM4871N.

Product Details:

• Ferrite drum core construction.
• Magnetically shielded.
• L×W×H: 12.3×12.3×8.0 mm Max.
• Product weight: 3.6g(Ref.)
• Moisture Sensitivity Level: 1
• Operating temperature range: -40℃～+100℃(including coil’s self temperature rise)
• Storage temperature range: -40℃～+100℃
• Ideally used in Notebook PC, LCD TV,DVD,Game machine, STB ,Projector etc as DC-DC converter inductors.

Additional Information:

• Packaging Details: PACKING DIFFER AS PER SIZE AND REQUIREMENTS

Product Details:

Specifications

 

Applications

• RF blocking and filtering
• Decoupling and interference suppression
• For antenna systems, automotive electronics, energy-saving lamps, entertainment electronics
• USB2.0 of IEEE1394, PC, peripheral equipment, small digital AV equipment, etc.
• LVDS lines of Note PC, LCD
• Audio lines