Eeprom Ic

Product Details:

The Microchip Technology Inc. 24LC512  is a 512Kb (64K x 8) Serial Electrically Erasable PROM (EEPROM), capable of operation across a broad voltage range (2.5V to 5.5V). It has been developed for advanced, low-power applications such as personal communications and data acquisition. This device also has a page write capability of up to 128 bytes of data. This device is capable of both random and sequential reads up to the 512K boundary. Functional address lines allow up to eight devices on the same bus, for up to 4 Mbit address space. This device is available in the standard 8-pin plastic DIP, SOIJ and DFN packages.

Product Details:

The M24512 is a 512-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 64 K × 8 bits. The M24512-W can operate with a supply voltage from 2.5 V to 5.5 V, the M24512-R can operate with a supply voltage from 1.8 V to 5.5 V, and the M24512-DF can operate with a supply voltage from 1.7 V to 5.5 V. All these devices operate with a clock frequency of 1 MHz (or less), over an ambient temperature range of –40 °C / +85 °C. The M24512-D offers an additional page, named the identification page (128 byte). The identification page can be used to store sensitive application parameters which can be (later) permanently locked in read-only mode. 

Product Details:

The M24C04 is a 4-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 512 × 8 bits. The M24C04-W can be accessed with a supply voltage from 2.5 V to 5.5 V, the M24C04-R can be accessed with a supply voltage from 1.8 V to 5.5 V, and the M24C04-F can be accessed either with a supply voltage from 1.7 V to 5.5 V (over the full temperature range) or with an extended supply voltage from 1.6 V to 5.5 V under some restricted conditions. All these devices operate with a clock frequency of 400 kHz, over an ambient temperature range of -40 °C / +85 °C.

Additional Information:

• Packaging Details: 2500 PCS REEL

Product Details:

• Low-Voltage and Standard-Voltage Operation: – VCC = 1.7V to 3.6V – VCC = 2.5V to 5.5V • Internally Organized as 65,536 x 8 (512K) • Industrial Temperature Range: -40°C to +85°C • I2C-Compatible (Two-Wire) Serial Interface: – 100 kHz Standard mode, 1.7V to 5.5V – 400 kHz Fast mode, 1.7V to 5.5V – 1 MHz Fast Mode Plus (FM+), 2.5V to 5.5V • Schmitt Triggers, Filtered Inputs for Noise Suppression • Bidirectional Data Transfer Protocol • Write-Protect Pin for Full Array Hardware Data Protection • Ultra Low Active Current (3 mA maximum) and Standby Current (6 μA maximum) • 128-Byte Page Write Mode: – Partial page writes allowed • Random and Sequential Read Modes • Self-Timed Write Cycle within 5 ms Maximum • ESD Protection > 4,000V • High Reliability: – Endurance: 1,000,000 write cycles – Data retention: 100 years • Green Package Options (Lead-free/Halide-free/RoHS compliant) • Die Sale Options: Wafer Form and Tape and Reel Available

Additional Information:

• Packaging Details: 4000 PCS REEL

Product Details:

Features • Compatible with following I2C bus modes: – 400 kHz – 100 kHz • Memory array: – 16 Kbit (2 Kbyte) of EEPROM – Page size: 16 byte • Single supply voltage: – M24C16-W: 2.5 V to 5.5 V – M24C16-R: 1.8 V to 5.5 V – M24C16-F: 1.7 V to 5.5 V (full temperature range) and 1.6 V to 1.7 V (limited temperature range) • Write time: – Byte write within 5 ms – Page write within 5 ms • Operating temperature range: – from -40 °C up to +85 °C • Random and sequential read modes • Write protect of the whole memory array • Enhanced ESD/latch-up protection • More than 4 million Write cycles • More than 200-year data retention Packages • SO8 ECOPACK2 • TSSOP8 ECOPACK2 • UFDFPN8 ECOPACK2 • UFDFPN5 ECOPACK2 • Unsawn wafer (each die is tested)